Reading Time: 2 minutes This blog is the “Step 12” of the NSX-T Installation series, where we will discuss Edge Clusters, its scaling limitations and step-by-step instructions on how to configure one…
Tag: EDGE
NSX-T Installation Series: Step 11 – Configure Edge Transport Node
Reading Time: 3 minutes This blog is the “Step 11” of the NSX-T Installation series, where we will discuss Edge Transport Nodes, its networking design and step-by-step instructions on how to configure one…
NSX-T Installation Series: Step 10 (Option 2) – Install NSX-T Edge VM on ESXi using NSX-T Manager UI
Reading Time: 4 minutes This blog is the “Step 10 (Option 2)” of the NSX-T Installation series, where we will discuss NSX-T Edge Nodes, Edge Transport Node design and step-by-step instructions on how to install NSX-T Edge VM on ESXi using NSX-T Manager UI…
NSX-T Edge: “get managers” command returns “No Managers Configured”
Reading Time: 2 minutes Knowledge increases by sharing it… There are different options to Install/Deploy NSX-T Edge Appliance i.e. from UI or CLI, VM type or on Bare Metal server. The command line options have a manual step to join the NSX-T Edge Appliance to the management plane but one
NSX-T Installation Series: Step 10 (Option 1) – Install NSX-T Edge VM on ESXi using vSphere UI
Reading Time: 5 minutes This blog is the “Step 10 (Option 1)” of the NSX-T Installation series, where we will discuss NSX-T Edge Nodes and step-by-step instructions on how to install NSX-T Edge VM on ESXi using vSphere UI…
NSX-T Edge: Types, limitations and considerations before Install/Deployment
Reading Time: 2 minutes Knowledge increases by sharing it… Whilst writing the NSX-T Installation Series: Step 10 to install an NSX-T Edge, I thought it was essential to complement it with further information. This blog focuses on the NSX-T Edge types, its limitations and considerations, so one can make
Quick Tip: How to generate a registration token from NSX-T Manager
Reading Time: < 1 minute Knowledge increases by sharing it… For different reasons, you may need to generate a registration token on the NSX-T Manager e.g. to register the NSX EDGE VM to the management plane during installation or for use in your automation scripts. This blog is another “quick tip”
NSX-T Architecture (Revamped): Part 1
Reading Time: 5 minutes Knowledge increases by sharing it… It’s been a while since I talked about the NSX-T architecture in my previous blog here, which unfortunately is now only applicable to NSX-T v2.3 and earlier. Fortunately, with NSX-T v2.4 and later, VMware introduced an architectural change that simplified the
Quick Tip: How to get the NSX-T Manager’s Thumbprint and Node UUID
Reading Time: < 1 minute Knowledge increases by sharing it… For various reasons you may need to get the NSX-T Manager’s thumbprint and Node UUID, e.g. joining the NSX EDGE VM to the management plane or for use in your automation scripts. This blog is another “quick tip” on how to
Quick Tip: Enable/Disable a service e.g. SSH/SNMP to persist on NSX-T EDGE VM reboots
Reading Time: < 1 minute Knowledge increases by sharing it… This blog is a quick tip, on how to enable/disable a service e.g. SSH on NSX-T EDGE VM. Unlike NSX-V Edge Service Gateway which lets you enable SSH from the UI, for NSX-T EDGE VM you need to enable it from