Reading Time: 2 minutes This is a “quick jump” blog for the NSX-T aspirants to keep as a bookmark/reference point. You do not need to refer any documentation anywhere, other than the steps summarized below and links embedded within to help your “VCP-NV” journey and beyond…
Tag: Routing Design
NSX-T Installation Series: Step 20: Configure Route Distribution on T0 (Tier-0) Gateway
Reading Time: 4 minutes This blog is part of the Second Phase i.e. building the logical network topology and the “Step 20” of the NSX-T Installation series, in which we will follow the step-by-step instructions to configure Route Distribution on T0 (Tier-0) Gateway, validate advertised routes and external connectivity via command line…
NSX-T Installation Series: Step 19 – Connect T1 (Tier-1) Gateway to T0 (Tier-0) Gateway
Reading Time: 3 minutes This blog is part of the “Second Phase” i.e. building the logical network topology and “Step 19” of the NSX-T Installation series, in which we will follow the step-by-step instructions to connect a T1 (Tier-1) Gateway to a T0 (Tier-0) Gateway and validate the learnt routes via command line…
NSX-T Installation Series: Step 17 – Create T0 (Tier-0) Gateway [active-active] and Configure BGP
Reading Time: 5 minutes This blog is part of the Second Phase i.e. building the logical network topology and “Step 17” of the NSX-T Installation series, in which we will discuss T0 (Tier-0) Gateway, its considerations, SR (Service Router), DR (Distributed Router), followed by step-by-step instructions on how to create an active-active T0 Gateway…
NSX-T Installation Series: Step 16 – Create VLAN Segments
Reading Time: 3 minutes This blog is part of the “Second Phase” i.e. building the logical network topology and “Step 16” of the NSX-T Installation series, in which we will discuss VLAN Segments and step-by-step instructions on how to configure one…
NSX-T Installation Series: Step 15 (Option 2) – Bulk VM Migration from vDS to N-VDS
Reading Time: 4 minutes This blog is part of the Second Phase i.e. building the logical network topology and “Step 15 (Option 2)” of the NSX-T Installation series, in which we will discuss step-by-step instructions on how to do a bluk VM Migration from vDS to N-VDS…
NSX-T Installation Series: Step 15 (Option 1) – Migrate VM(s) from vDS to N-VDS
Reading Time: 4 minutes This blog is part of the Second Phase i.e. building the logical network topology and “Step 15 (Option 1)” of the NSX-T Installation series, in which we will discuss step-by-step instructions on how to migrate VM(s) from vDS to N-VDS…
NSX-T Installation Series: Step 14 – Create Overlay Segments
Reading Time: 4 minutes This blog is part of the Second Phase i.e. building the logical network topology and “Step 14” of the NSX-T Installation series, where we will discuss Overlay Segments and step-by-step instructions on how to configure one…
NSX-T Installation Series: Step 13 – Create T1 (Tier-1) Gateway
Reading Time: 4 minutes This blog begins the Second Phase i.e. building the logical network topology and “Step 13” of this NSX-T Installation series, which will discuss T1 (Tier-1) Gateway, its considerations, SR (Service Router), DR (Distributed Router), followed by step-by-step instructions on how to create one…
NSX-T Installation Series: Step 0 – High Level Design
Reading Time: 3 minutes Before any product deployment, it is common practice to document an architecture design and most enterprises follow some sort of framework e.g. TOGAF that helps organize concepts, knowledge and understanding. Therefore, I thought it would be ideal to compose “Step 0” of this ‘step-by-step’ Installation series, to help visualize the overall design and component placement…