Reading Time: 2 minutes This is a “quick jump” blog for the NSX-T aspirants to keep as a bookmark/reference point. You do not need to refer any documentation anywhere, other than the steps summarized below and links embedded within to help your “VCP-NV” journey and beyond…
Tag: Distributed Router
NSX-T Installation Series: Step 20: Configure Route Distribution on T0 (Tier-0) Gateway
Reading Time: 4 minutes This blog is part of the Second Phase i.e. building the logical network topology and the “Step 20” of the NSX-T Installation series, in which we will follow the step-by-step instructions to configure Route Distribution on T0 (Tier-0) Gateway, validate advertised routes and external connectivity via command line…
NSX-T Installation Series: Step 19 – Connect T1 (Tier-1) Gateway to T0 (Tier-0) Gateway
Reading Time: 3 minutes This blog is part of the “Second Phase” i.e. building the logical network topology and “Step 19” of the NSX-T Installation series, in which we will follow the step-by-step instructions to connect a T1 (Tier-1) Gateway to a T0 (Tier-0) Gateway and validate the learnt routes via command line…
NSX-T Installation Series: Step 18 – T0 (Tier-0) Gateway: Map BGP neighbor to specific Uplink Interface
Reading Time: 4 minutes This blog is part of the Second Phase i.e. building the logical network topology and “Step 18” of the NSX-T Installation series, in which we will discuss “Why” we need to map BGP Neighbor to specific Uplink (External) Interfaces, step-by-step instructions on how to map and validate via command line…
NSX-T Installation Series: Step 17 – Create T0 (Tier-0) Gateway [active-active] and Configure BGP
Reading Time: 5 minutes This blog is part of the Second Phase i.e. building the logical network topology and “Step 17” of the NSX-T Installation series, in which we will discuss T0 (Tier-0) Gateway, its considerations, SR (Service Router), DR (Distributed Router), followed by step-by-step instructions on how to create an active-active T0 Gateway…
NSX-T Installation Series: Step 13 – Create T1 (Tier-1) Gateway
Reading Time: 4 minutes This blog begins the Second Phase i.e. building the logical network topology and “Step 13” of this NSX-T Installation series, which will discuss T1 (Tier-1) Gateway, its considerations, SR (Service Router), DR (Distributed Router), followed by step-by-step instructions on how to create one…