Reading Time: 5 minutes This blog is part of the Second Phase i.e. building the logical network topology and “Step 17” of the NSX-T Installation series, in which we will discuss T0 (Tier-0) Gateway, its considerations, SR (Service Router), DR (Distributed Router), followed by step-by-step instructions on how to create an active-active T0 Gateway…
Tag: considerations
NSX-T Installation Series: Step 13 – Create T1 (Tier-1) Gateway
Reading Time: 4 minutes This blog begins the Second Phase i.e. building the logical network topology and “Step 13” of this NSX-T Installation series, which will discuss T1 (Tier-1) Gateway, its considerations, SR (Service Router), DR (Distributed Router), followed by step-by-step instructions on how to create one…
NSX-T Edge: Types, limitations and considerations before Install/Deployment
Reading Time: 2 minutes Knowledge increases by sharing it… Whilst writing the NSX-T Installation Series: Step 10 to install an NSX-T Edge, I thought it was essential to complement it with further information. This blog focuses on the NSX-T Edge types, its limitations and considerations, so one can make
NSX-T v2.3 Installation: Step 3 – Deploy NSX-T Controllers
Reading Time: 4 minutes Knowledge increases by sharing it… In this blog post, we will discuss NSX-T Controller recommendations, important considerations, process, methods and pre-requisites, followed by the step by step instructions. If you are new to NSX-T, I would also encourage you to refer my NSX-T Architecture blog post to get