Reading Time: 2 minutes A Virtual Machine running on ESXi Host would not power on and gets stuck at 88% until it errors with the message “Module ‘DevicePowerOn’ power on failed. Failed to start the virtual machine. Device x:y.z is already in use”. This is a quick blog to help anyone with a similar PCI Passthrough (Passthru) issue I faced recently…
Tag: Passthrough
Passthrough enabled PCI Graphic Card, reports problems (Code 43) in “Windows OS” guest VM
Reading Time: 2 minutes Knowledge increases by sharing it… As the title states, this blog is about the passthrough enabled PCI Graphic Card, which reports problems inside a “Windows OS” guest Virtual Machine. Use case: The PCI device, in my case is a “NVIDIA GTX 1080 TI” graphic card. Hypervisor:
PCI Passthrough – “Module ‘DevicePowerOn’ power on failed”
Reading Time: 2 minutes Knowledge increases by sharing it… Slightly deviating from the NSX focus, thought I should share this resolve, to help the wider community. Use case: The PCI device in my case is a NVIDIA GTX 1080 TI graphic card. ESXi 6.7 U2 After, you configure PCI Device